CakeWasBannedd

You could in theory solder to the quick disconnects in the terminal block (that black bar thing on your TE) but that's not recommended as you may move around those wires and will line up the wrong wires per button which will lead to catastrophic results. What you end up doing is you take your madcatz PCB and flip it around so the board is upside down. You'll see on the board writing about which pin is which button. http://yfrog.com/f/5ychimpmadcatzp/ this picture should give you a better idea about which wires on the madcatz board gets soldered down to your MCthulhu. However you have to follow the rtzdign guide when installing that RJ45 cable. This part involves the 4 cables in the USB cable as you need to solder down the D+/D- points to either an imp board for automatic console switching or a DPDT switch if you want to switch consoles manually.