mr.mortified

no i mean that the SF te layout is the generally accepted layout

again with this..... go read this thread over again from the beginning this time before someone starts this clusterfuck again

you mean you didn't do the standard TE layout? that's usually the best layout

not duct tape, electrical tape in straight electronic modding fashion

that is correct, it will make it only a smidge stiffer did you at least fix the button layout when you did your rewiring?

if you feel like an LS56 spring is too stiff, add a JLF spring to that LS33. so in other words, include both the ls33 spring and the JLF spring inside the LS33 don't buy what you can mod as i like to say also since we're on the topic of this

no you don't need the actuator and stuff, it all comes with what you need also that JLW is easy enough to install into that stick as it comes with waht seems to be a compatible mounting plate. just screw the new stick in, pull out the quick disconnects on teh stick and replace them onto the JLW for the buttons, i think you'd have to solder it but if i remember right you want to keep them so that's a non-issue

if its a fanta its korean sticks they still install the same

not happs its fine with sanwas/semitsus

its no problem as long as your pcb that you're using is common ground (there's a bit more wiring dinks if it wasn't) and there's also a bit of heavy case modification if i remember right, the happ/IL/Suzo sticks use quick disconnect terminals instead of wire harnesses you're going to have to pull out your soldering iron and figure out which one the wires leading up to the switch is the ground and signal. from there, link the ground wires together and follow the JLF pinout on the other side. You're also going to have to modify the case to accept a japanese joystick. That requires a few woodworking tools (if its a wood case) just out of curiosity, what kind of stick do you have? because you said american, i'm going to assume either AIAB, MAS, or those old school pelican sticks

If you're using clear buttons, dont forget about the size of the circle you need for the art inside. I can't remember the exact dimensions but its somewhere in the ballpark of 20-22mm for the circle inside the button

i need to get serious about FG's again please tell me how to win :3

oh yuyu

as long as we dont' have the same fiasco as last year where we drop ourselves out of evo because of the CT to CS switch most likely it will be CS1 as we dont' have a release date for CS2 yet

i wish i had money to evo

laugh i would go this friday if i didn't have my dick third term test for an accounting course this saturday

why can't school finish faster so i can get back to gaming hard? also fukken starcraft is killing my studying

someone in SRK heroes world thread is selling one for 300. 80gig +2 dualshocks + 4 games

the only place i've found number notations acceptable is tech talk i think that's because people who post there actually think unlike most of the SRK clientele

you just missed a madcatz sale then sanguine. it ended yesterday

please and thank you :3

check your character threads and look at the frame data

the paewang eh? good choice but if you're looking for art, try zepp museum or SRK's tech talk and asking someone to do it for you there. I'm not the most photoshop adept myself. If you were asking something about actual modding then i could help out there

its still pretty cool and would probably have a shitload of resale value with bb art and if the other buyer is also called ronove

if only it didn't say street fighter ;_; also it figures that d3v made that template........